Evolis Primacy プリンターをクリーニングするための段階的な手順

Evolis Primacy プリンターを清潔に保つことは、印刷品質を維持し、マシンの寿命を延ばすために不可欠です。. Follow these step-by-step instructions to ensure your printer stays in top condition.

Why Regular Cleaning is Important

Regular cleaning of your Evolis Primacy printer prevents dust and debris from affecting print quality. It also reduces the likelihood of printer malfunctions, saving you time and money in the long run.

Materials Needed for Cleaning

Before you start, gather the following materials:

• Cleaning cards (1 x T-shaped cleaning card, 1 x adhesive cleaning card)

Evolis ロング T 型クリーニングカード

• Cleaning swabs / cleaning pen

自己飽和イソプロピルアルコールクリーンスワブ

• Cleaning wipes

• 手袋 (optional for handling cleaning agents)

ステップ 1: Turn Off and Unplug the Printer

The first step in cleaning your Evolis Primacy printer is to ensure safety. Turn off the printer and unplug it from the power source. Allow the printer to cool down for a few minutes to avoid any electrical issues or injury during the cleaning process.

ステップ 2: Clean the Exterior of the Printer

Using a lint-free cleaning wipes slightly dampened with isopropyl alcohol, gently wipe down the exterior of the printer. Focus on removing any dirt, ほこり, or smudges, especially around card input/output areas.

ステップ 3: Clean the Card Feeder and Rollers

• Open the card feeder compartment and remove any cards. If the printer has a card thickness selector, slide it to maximum thickness.
• Open the packaging of the T-shaped cleaning card. When the cards and ribbon LED is flashing / the touch-sensitive screen indicates, insert the T-shaped cleaning card through the card feeder until it is drawn into the printer.
• The printer will run the T-shaped cleaning card back and forth for about 30 秒, then eject it. And discard the T-shaped cleaning card.
• Remove the film from the adhesive cleaning card and hold with the adhesive side upwards. When the cards and ribbon LED is flashing / the touch-sensitive screen indicates, insert the adhesive cleaning card through the card feeder until it is drawn into the printer.
• The printer will run the adhesive cleaning card through the printer then eject it. And discard the adhesive cleaning card.
• 必要に応じて, use a cleaning swab to manually clean the rollers and feeder.

ステップ 4: プリントヘッドをクリーニングする

The printhead is one of the most critical parts of the printer and should be cleaned with care.

• プリンター カバーを開いてプリントヘッドにアクセスします.
• Use an Evolis cleaning swab or pen dipped in isopropyl alcohol to gently wipe the printhead in a single direction. Avoid scrubbing or applying too much pressure to prevent damaging the sensitive component.
• Let it dry completely before closing the cover.

ステップ 5: Clean the Interior and Sensor

Dust can accumulate inside the printer and on the sensor.

• Use a soft lint-free cloth to wipe the interior, removing any visible dust.
• If dust is stuck in hard-to-reach areas, use a swab to get into crevices.

ステップ 6: Final Check and Test Print

Once everything is cleaned and dry, plug the printer back in and turn it on. Run a test print to ensure the cleaning process has been successful and that the print quality has improved. If any issues persist, repeat the cleaning steps or consult your Evolis printer manual for troubleshooting.

How Often Should You Clean Your Evolis Primacy Printer?

It is recommended to clean the Evolis Primacy printer after every 1,000 card prints or every time you change the ribbon. Regular maintenance will help keep your printer in top condition and ensure consistent print quality.